Tuner - FM / HD / XM (Remove and Replace)
Correction code
21220102
0.18
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
- Remove the lower liftgate trim. See Trim - Liftgate - Lower (Remove and Replace).
-
Disconnect the coax connector on the
tuner harness from the FM / HD tuner.
-
Disconnect the RH liftgate harness
electrical connector from the LH side of the FM / HD tuner.
-
Disconnect the RH liftgate harness
electrical connector from the RH side of the FM / HD tuner.
-
Remove the bolts (x3) that attach the
FM / HD tuner to the liftgate, and then pull the tuner downward and out of the liftgate
from the LH side.
NaN Nm (NaN lbs-ft)Tip: Use of the following tool(s) is recommended:- 10 mm socket
Install
-
Position the FM / HD tuner into the
liftgate, and then install the bolts (x3) that attach the tuner to the liftgate.NaN Nm (NaN lbs-ft)Tip: Use of the following tool(s) is recommended:
- 10 mm socket
-
Connect the RH liftgate harness electrical connector on the RH side of the FM / HD
tuner.
-
Connect the RH liftgate harness electrical connector on the LH side of the FM / HD
tuner.
-
Connect the coax connector on the tuner harness to the FM / HD tuner.
- Install the lower liftgate trim. See Trim - Liftgate - Lower (Remove and Replace).
- Connect a laptop with Toolbox 3 to the vehicle.
- In Toolbox, click the Actions tab, and then type "Tuner" in the search field.
- Click the play button next to PING-BASH_TUNER, and then click Run.
- Disconnect Toolbox and remove the laptop from the vehicle.