Riser - Outer - Driver Seat (Remove and Replace)
Correction code 13012002 0.36 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.
Remove
- Remove the driver seat from the vehicle. See Seat Assembly - 1st Row - LH (Remove and Replace).
-
Remove the clips (x2) that attach the
driver seat outer riser to the vehicle, and then remove the riser from the
vehicle.
Install
-
Position the driver seat outer riser into the vehicle, and then install the clips
(x2) that attach the riser to the vehicle.
- Install the driver seat into the vehicle. See Seat Assembly - 1st Row - LH (Remove and Replace).