Hose - Washer - Cowl Screen (Remove and Replace)
Correction code
17500012
0.36
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
- Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
- Remove the LH and RH underhood apron. See Underhood Apron - LH (Remove and Replace).
- Remove the LH and RH wiper arms. See Wiper Arm - LH (Remove and Replace).
- Remove the LH and RH shock tower covers. See Cover - Shock Tower - LH (Remove and Replace).
-
Remove the clips (x4) that attach the
wiper cowl screen panel to the vehicle.
Note4x push clips, 2x end tabs
- Remove the washer joints from the cowl hose.
-
Remove the cowl hose from the cowl
screen panel.
CAUTIONCarefully pull on the cowl hose while bracing the cowl screen panel to remove the cowl hose.
Install
- Install the cowl hose to the cowl screen panel.
- Install the washer joints to the cowl hose.
-
Install the clips (x4) that attach the
wiper cowl screen panel to the vehicle.
Note4x push clips, 2x end tabs
- Install the LH and RH wiper arms. See Wiper Arm - LH (Remove and Replace).
- Install the LH and RH shock tower covers. See Cover - Shock Tower - LH (Remove and Replace).
- Install the LH and RH underhood aprons. See Underhood Apron - LH (Remove and Replace).
- Install the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).