27/06/2023 13:56:37

Mirror - Rear View (Remove and Replace)

Correction code 15050202 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Remove the lower camera cover. See Camera Cover - Lower (Remove and Replace).
  2. Disconnect the rear view mirror electrical connector.
  3. Rotate the rear view mirror to release it from the mounting base, and then remove the mirror from the vehicle.

Install

  1. Install the rear view mirror by turning the mirror counterclockwise until the mirror is secured on the mounting base.
  2. Connect the rear view mirror electrical connector, and then tuck the electrical harness slack along the arm.
  3. Install the lower camera cover. See Camera Cover - Lower (Remove and Replace).