Guide Lock - Headrest - 2nd Row (Remove and Replace)
Correction code 13059452 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.
Remove
- Remove the LH 2nd row seat back panel. See Back Panel – 2nd Row Seat – LH (Remove and Replace).
- Remove the LH 2nd row headrest. See Headrest - 2nd Row - LH (Remove and Replace).
-
Lift the 2nd row headrest guide lock
locking tab, and then slide the guide lock out of the seat frame assembly.
Install
-
Slide 2nd row headrest guide lock into the backrest frame.
NoteMake sure the headrest guide locking tab is fully engaged.
- Install the LH 2nd row headrest. See Headrest - 2nd Row - LH (Remove and Replace).
- Install the LH 2nd row seat back panel. See Back Panel – 2nd Row Seat – LH (Remove and Replace).