Grille - Speaker - Liftgate (Remove and Replace)
Correction code 15112002 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.
Remove
-
Release the clips (x8) that attach the
lower liftgate trim to the liftgate, then disconnect the electrical connectors (x2), and
then remove the lower liftgate trim from the vehicle.
CAUTIONDo not let the lower liftgate trim hang or drop quickly for it will damage the electrical connector for the trunk close button.
-
Release the clips (x8) that attach the
liftgate speaker grille to the liftgate, and then remove the grille from the
vehicle.
Install
-
Secure the clips (x8) that attach the
liftgate speaker grille to the liftgate.
-
Secure the clips (x8) and the
electrical connectors (x2) that attach the lower liftgate trim to the liftgate.