Cover - Pivot - 2nd Row (Remove and Replace)
Correction code
13057602
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
- Remove the LH 2nd row seat back. See Seat Back - 2nd Row - LH (Remove and Replace) .
- Remove the RH 2nd row seat back. See Seat Back - 2nd Row - RH (Remove and Replace).
- Remove the 2nd row pivot cover.
Install
- Install the 2nd row center pivot cover.
- Install the RH 2nd row seat back. See Seat Back - 2nd Row - RH (Remove and Replace).
- Install the LH 2nd row seat back. See Seat Back - 2nd Row - LH (Remove and Replace) .