19/07/2023 03:01:31

Washer Nozzles (Adjust)

Correction code 17301300 0.10 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Adjustment

  1. While operating the washer function, make sure that the washer fluid is sprayed on the windshield at the locations as indicated.
    Figure 1. LH side
    Figure 2. RH side
  2. If necessary, use a 90 degree pick tool or similar to adjust the spray position of the nozzle(s).
  3. Operate the washer function and confirm that the washer fluid is sprayed on the windshield at the locations as indicated. Re-adjust as necessary.