17/06/2022 13:20:07

Bright Strip - Center Console - Rear (Remove and Replace)

Correction code 15190312 0.36 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT, although it has been validated. Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near high voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Remove

  1. Remove the center console air wave assembly. See Air Wave Assembly - Center Console (Remove and Replace).
  2. Remove the screws (x6) that attach the rear center console bright strip to the center console, and then remove the bright strip.
    Informational PurposesAn informational icon, calling your attention
    Note
    Release the datums and rotate bright up and out of the center console.
    Informational PurposesAn informational icon, calling your attention
    Note
    T10 (x4); torque 0.7 Nm. T20 (x2); torque 1 Nm.

Install

  1. Install the screws (x6) that attach the rear center console bright strip to the center console.
    Informational PurposesAn informational icon, calling your attention
    Note
    T10 (x4); torque 0.7 Nm. T20 (x2); torque 1 Nm.
  2. Install the center console air wave assembly. See Air Wave Assembly - Center Console (Remove and Replace).