2022-06-17

Wiper Blades (Adjust)

Correction code 17501700 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Procedure

  1. Remove the LH and RH wiper arm nut covers.
  2. Loosen the RH wiper arm and line up the wiper blade to the reference mark on the windshield, then torque the wiper arm nut.
    Informational PurposesAn informational icon, calling your attention
    Note
    1x nut, 15mm, 26 Nm
  3. Loosen the LH wiper arm and line up the wiper blade to the reference mark on the windshield, then torque the wiper arm nut.
    Informational PurposesAn informational icon, calling your attention
    Note
    1x nut, 15mm, 26 Nm
  4. Install the LH and RH wiper arm nut covers.