NVH Pad - Panel - Door Trim - Front - LH (Remove and Replace)
Correction code
15131402
0.12
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
- Remove LH front door trim decor. See Decor - Trim - Front Door - LH (Remove and Replace).
- Remove the LH front door trim panel. See Panel - Door Trim - Front - LH (Remove and Replace).
- Unhook the LH front door trim panel NVH pad from the locating tabs (x4), and then remove the pad from the LH front door panel.
Install
- Position the LH front door trim panel NVH pad onto the LH front door panel. and then hook the pad onto the locating tabs (x4).
- Install the LH front door trim panel. See Panel - Door Trim - Front - LH (Remove and Replace).