Underhood Apron - LH (Remove and Replace)
Correction code
12251202
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
- Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
-
Release the clips (x10) that
attach the LH underhood apron to the vehicle, and then remove the apron from
the vehicle.
Install
-
Install the LH underhood
apron to the vehicle, and then fasten the clips (x10) that attach the apron
to the vehicle.
- Install the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).