Switch - Liftgate - Interior (Remove and Replace)
Correction code
11352802
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
- Open the liftgate.
- Remove the lower liftgate trim. See Trim - Liftgate - Lower (Remove and Replace).
- Release the tabs (x2) that attach the interior liftgate switch to the lower liftgate trim, and then remove the switch from the trim.
Install
- Install the interior liftgate switch into the lower liftgate trim.
- Install the lower liftgate trim. See Trim - Liftgate - Lower (Remove and Replace).
- Close the liftgate.