Skull Cap - Door Mirror - LH (Remove and Replace)
Correction code 12091702 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.
Remove
-
Release the door mirror skull cap up
along the outer edge.
-
Pull up on the door mirror skull cap
to release the tabs (x5), and then remove the skull cap from the door mirror
assembly.
Install
-
Position the door mirror skull cap
onto the door mirror assembly, and then align the tabs (x5).
-
Push down to secure the door mirror
skull cap to the door mirror assembly.
NoteMake sure there are no gaps at inner perimeter of the skull cap to the door mirror assembly.