Seal - Secondary - Front Door - LH (Remove and Replace)
Correction code
11705002
0.18
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
- Remove the LH front door trim decor. See Decor - Trim - Front Door - LH (Remove and Replace).
- Remove the LH front door trim panel. See Panel - Door Trim - Front - LH (Remove and Replace).
-
Release the clips (x4) that attach the
LH front door seal to the door assembly, and then remove the seal from the door
assembly.
-
Release the clips (x19) that attach
the LH front door secondary seal to the door assembly, and then remove the seal from the
vehicle.
Install
-
Align the LH front door secondary seal onto the door assembly, and then install the
clips (x19) that attach the seal to the door assembly.
-
Position the LH front door seal onto the door assembly, and then install the clips
that attach the seal to the door assembly.
- Install the LH front door trim panel. See Panel - Door Trim - Front - LH (Remove and Replace).
- Install the LH front door trim decor. See Decor - Trim - Front Door - LH (Remove and Replace).