Additional Key - Program (Existing Key Present)
Correction code
– Key Fob:
17450503
Key Card:
17450406
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
- On the touchscreen, touch Controls > Locks, and then touch + in the Keys section.
-
Scan your new key card or key fob on the card reader located on the wireless phone
charger. To scan the key fob:
- Place it at the top of the left phone charger, against the center divider.
- Point the front of the key fob down.
- Swipe downwards (as shown in the image).
- When you hear a chime and the new key is recognized, remove it from the card reader.
- Scan a key card or key fob that has already been paired to the vehicle to confirm new key pairing.
- When complete, the key list includes the new key. Touch the associated pencil icon to customize the name of the key.
- Verify function of the new key fob using the buttons to lock or unlock the doors, open the hood, and open the trunk.