2022-09-22

Reflex Marker - Taillight - RH (Remove and Replace)

Correction code 17400022 0.36 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Informational PurposesAn informational icon, calling your attention
Note
This procedure is for the Original version of this part. An updated/region-specific Global Refresh version of this part is available for newer vehicles and that procedure is here: Reflex Marker - Taillight - RH (Global) (Remove and Replace).

Remove

  1. Remove the RH tail light from the vehicle. See Taillight - RH (Remove and Replace).
  2. Remove the fixed door from the RH tail light.
    Informational PurposesAn informational icon, calling your attention
    Note
    3x screws

Install

  1. Install the screws (x3) that attach the fixed door to the RH tail light.
    Informational PurposesAn informational icon, calling your attention
    Note
    3x screws, T20, 2.5 Nm, 2x datums.
    Informational PurposesAn informational icon, calling your attention
    Note
    Ensure that the datums on the tail light align with the slots on the fixed door before installing the screws
  2. Install the RH tail light. See Taillight - RH (Remove and Replace).