Cover - Applique - B-Pillar - LH (Remove and Replace)
Correction code
12200112
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are
created.
NOTE: See Personal Protection to make sure proper PPE is worn
when performing the
below
procedure.
Remove
- Open the LH front and LH rear doors.
-
Release the clips (x2) that attach the
B-pillar applique cover located at the top using a plastic trim tool, and then slide the
cover downwards to release the bottom tabs (x2).
Replace
-
Position the bottom tabs (x2) of the
B-pillar applique cover to the body, and then attach the top clips (x2) to the
body.