Wheel Arch Liner - Front - LH (Remove and Replace)
Correction code 12010902 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.
Remove
- Move the vehicle to a 2 post lift. See Raise Vehicle - 2 Post Lift.
- Remove the LH front wheel. See Wheel Assembly (Remove and Install).
- Release the clips (x7) that attach the front portion of the LH front wheel arch liner to the body, and then move the liner aside.
- Remove the clips (x6) that attach the rear portion of the LH front wheel arch liner to the body, and then remove the wheel arch liner from the vehicle.
Install
- Install the LH front wheel arch liner into the LH front wheel arch, and then fasten the clips (x6) that attach the rear portion of the wheel arch liner to the body.
- Install the clips (x7) that attach the front portion of the LH front wheel arch liner to the body.
- Install the LH front wheel. See Wheel Assembly (Remove and Install).
- Remove the vehicle from the 2-post lift. See Raise Vehicle - 2 Post Lift.