2023-05-18

Camera Cover - Lower (Remove and Replace)

Correction code 15050902 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Release the tabs (x4) that attach the lower camera cover.
    Informational PurposesAn informational icon, calling your attention
    Note
    Press inward on the sides of the cover and pull the bottom edge downward to release.
  2. Press on the tabs (x2) to release, and then remove the lower camera cover from the tether.

Install

  1. Install the tether onto the lower camera cover.
    Informational PurposesAn informational icon, calling your attention
    Note
    Guide the tabs (x2) through the anchor on the lower camera cover.
  2. Install the lower camera cover.
    Informational PurposesAn informational icon, calling your attention
    Note
    Install the tabs (x4) closest to the rear view mirror, and then push the cover up to secure it.