Lamp - Reflex - Rear - LH (Remove and Replace)
Correction code
17403502
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are
created.
NOTE: See Personal Protection to make sure proper PPE is worn
when performing the
below
procedure.
Remove
- Clean the reflex lamp area of the rear fascia using IPA wipes.
-
Use a plastic trim tool to release the
two clips that attach the LH rear reflex lamp to the rear fascia, and then remove the LH
rear reflex lamp from the rear fascia.
NoteDiscard of the old reflex lamp if any clips are broken.
Install
-
Position the LH rear reflex lap to the
rear fascia, and then install the two clips that attach LH rear reflex lamp to the rear
fascia.