Seal - Door - Front - Margin - A Pillar - LH (Remove and Replace)
Correction code 11700702 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.
Remove
-
Release the clips (x3) that attach the
A-pillar margin front door seal to the LH front door.
-
Remove the A-pillar margin front door
seal from the LH front door.
NotePartially open and close the door as needed to access the seal.
Install
-
Install the A-pillar margin front door seal onto the LH front door.
NotePartially open and close the door as needed to access the seal.
-
Install the A-pillar margin front door seal onto the LH front door.