Cover - Tow Hook - Rear (Remove and Replace)
Correction code
10012012
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
-
Pry outward on the top corners of the
rear tow hook cover to release it from the rear fascia, and then disconnect the tether
to remove it from the vehicle.
Install
-
Slide the tab into the slotted
location on the rear fascia, connect the tether, and then press inward on the top
corners of the rear tow hook cover to engage the clips.
