18/05/2023 14:51:53

Cover - Footwell - Passenger (Remove and Replace)

Correction code 14055402 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Open the RH front door.
  2. Move the front passenger seat fully rearward.
  3. Pull down to release the passenger footwell cover, but do not remove the cover as there is a connector still connected.
    Informational PurposesAn informational icon, calling your attention
    Note
    The passenger footwell cover is secured using magnets.
  4. Disconnect the electrical connector, and then remove the passenger footwell cover from the vehicle.

Install

  1. Position the passenger footwell cover into the vehicle, and then connect the electrical connector.
  2. Secure the magnets that attach the passenger footwell cover to the vehicle.
  3. Move the front passenger seat to its original position.
  4. Close the RH front door.