17/06/2022 13:13:12

Pivot Bushing - Seat Back - 2nd Row - LH (Remove and Replace)

Correction code 13056702 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Remove the LH 2nd row seat back. See Seat Back - 2nd Row - LH (Remove and Replace) .
  2. Place the LH 2nd row seat back assembly upside down on a padded workbench.
  3. Use a paint pen to mark the orientation of the pivot components.
  4. Remove the E-clip that attaches the pivot cast to the seat assembly.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    Use caution to avoid personal injury or damage to vehicle interior.
  5. Remove the pivot cast from the seat assembly.
  6. Rotate the LH 2nd row seat back pivot bushing counterclockwise to release it from the LH 2nd row pivot static collar.

Install

  1. Mark the new LH 2nd row seat back pivot bushing to match orientation of the old pivot bushing.
  2. Press the LH 2nd row seat back pivot bushing onto the assembly to secure it to the LH 2nd row pivot static collar.
  3. Install the pivot cast onto the seat assembly.
  4. Install the E-clip that attaches the pivot cast to the seat assembly.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    Warning
    Use caution to avoid personal injury or damage to vehicle interior.
  5. Install the LH 2nd row seat back. See Seat Back - 2nd Row - LH (Remove and Replace) .