2026-07-06
Seal - Output - Front Drive Unit - LH (Remove and Replace)
Correction code
39300100801
39300100802
FRT
1.32
NOTE: Unless otherwise explicitly stated in the procedure, the correction code and FRT listed above reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created.
NOTE: See Personal Protection to make sure you
are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy working practices.
- 2026-06-24: Released new procedure.
Remove
- Remove the LH front halfshaft. See Halfshaft - Front Drive Unit - LH (Remove and Replace).
-
Remove LH front output axle seal from
FDU
Install
-
Install LH front output axle seal into
FDU
Note1x axle seal, Verify seal is fully seated
- Install the LH front halfshaft. See Halfshaft - Front Drive Unit - LH (Remove and Replace).