2025-02-20

Actuator - Cinching - Liftgate (Remove and Replace)

Correction code 11352202 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.
  1. Open liftgate
  2. Remove lower liftgate trim
    Informational PurposesAn informational icon, calling your attention
    Note
    8x clips, 2x connectors, Be careful not to hang or drop quickly to prevent damage to connectors
  3. Disconnect liftgate high force cinching actuator connector
    Informational PurposesAn informational icon, calling your attention
    Note
    1x connector, Press locking tabs to release
  4. Remove bolts securing liftgate high force cinching actuator to liftgate
    Informational PurposesAn informational icon, calling your attention
    Note
    3x bolts, T20, Torque?
  5. Remove liftgate high force cinching actuator from liftgate and disconnect cable
    Informational PurposesAn informational icon, calling your attention
    Note
    2x holding tabs
  6. Connect cable to liftgate high force cinching actuator and position actuator into liftgate
    Informational PurposesAn informational icon, calling your attention
    Note
    2x holding tabs
  7. Install bolts securing liftgate high force cinching actuator to liftgate
    Informational PurposesAn informational icon, calling your attention
    Note
    3x bolts, T20, Torque?
  8. Connect liftgate high force cinching actuator connector
    Informational PurposesAn informational icon, calling your attention
    Note
    1x connector, Engage locking tabs
  9. Install lower liftgate trim
    Informational PurposesAn informational icon, calling your attention
    Note
    8x clips, 2x connectors
  10. Close liftgate