Puddle Light - Front Door - LH (Remove and Replace)
Correction code
17351202
0.12
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
- Open the LH front door and lower the LH front window.
- Remove the LH front door decor trim. See Decor - Trim - Front Door - LH (Remove and Replace).
- Remove the LH front door trim panel. See Panel - Door Trim - Front - LH (Remove and Replace).
-
Release the tabs (x3) that attach the
LH front door puddle light bezel to the LH front door trim panel, and then remove the
bezel from the panel.
NotePry the bezel from door trim panel.
- Use a 90 degree pick to depress the locking tabs (x3), and then use a pocket screwdriver to pry the LH front door puddle light through the access hole in the LH front door trim panel.
- Release the locking tab, and then disconnect the LH front door puddle light from the door trim panel harness.
Install
- Connect the LH front door puddle light to the LH front door harness.
- Install the LH front door puddle light into the LH front door trim panel.
-
Install the LH front door puddle light
bezel into the LH front door trim panel.
NoteAlign the tabs (x3) with the slots in puddle light, and then push the bezel into lamp assembly.
- Install the LH front door trim panel. See Panel - Door Trim - Front - LH (Remove and Replace).
- Install the LH front door decor trim. See Decor - Trim - Front Door - LH (Remove and Replace).
- Raise the LH front window and close the LH front door.