Escutcheon - Seatbelt - 2nd Row - LH (Remove and Replace)
Correction code
20056402
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
- Open the LH front door and lower the LH front window.
-
Maneuver the seatbelt through the
escutcheon opening, position the 2nd row center seatbelt escutcheon onto the seat
assembly, and then secure the tabs (x5) that attach the escutcheon to the
assembly.
Install
-
Maneuver the seatbelt through the escutcheon opening, position the 2nd row center
seatbelt escutcheon onto the seat assembly, and then secure the tabs (x5) that attach
the escutcheon to the assembly.
- Raise the LH rear window and close the LH rear door.