Trim - C-Pillar - Lower - LH (Remove and Replace)
Correction code 15185802 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.
Remove
- Remove LH and RH side bolster trims. See Bolster - Outer - Seat - 2nd Row - LH (Remove and Replace).
- Remove 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
-
Fold the LH 2nd row seat to the down
position.
CAUTIONIf seat cushion is not present, protect the seat as required.
-
Release the clips (x8) that attach the
LH lower C-pillar trim to the C-pillar, and then remove the trim from the vehicle.
Install
-
Position the LH lower C-pillar trim onto the C-pillar, and then fasten the clips (x8)
that attach the trim to the vehicle.
-
Fold the LH 2nd row seat to the up
position.
NoteRemove the seat cushion protection.
- Install 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
- Install LH and RH side bolster trims. See Bolster - Outer - Seat - 2nd Row - LH (Remove and Replace).