17/06/2022 13:14:59

Side Shield - Inboard - Driver Seat (Remove and Replace)

Correction code 13041122 0.36 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Carefully release the clips (x7) that attach the driver seat inboard side shield to the seat assembly.

Install

  1. Position the driver seat inboard side shield onto the seat assembly, and then fasten the clips (x7) that attach the side shield to the assembly.