Puddle Light - Liftgate (Remove and Replace)
Correction code
17352402
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
- Remove the lower liftgate trim. See Trim - Liftgate - Lower (Remove and Replace)
-
Release the tabs (x3) that attach the
liftgate puddle lamp cover to the liftgate puddle lamp, and then remove the cover from
the puddle lamp.
-
Release the holding tabs (x5) that
attach the liftgate puddle lamp to the lower liftgate trim, and then remove the puddle
lamp from the trim.
Install
-
Position the liftgate puddle lamp to
the lower liftgate trim, and then secure the holding tabs (x5) that attach the puddle
lamp to the trim.
-
Install the liftgate puddle lamp cover
onto the liftgate puddle lamp.
- Install the lower liftgate trim. See Trim - Liftgate - Lower (Remove and Replace)