Speaker - Rear Door - LH (Remove and Replace)
Correction code
21211002
0.18
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
- Remove the LH rear door trim panel. See Panel - Door Trim - Rear - LH (Remove and Replace).
- Disconnect the LH rear door speaker electrical connector.
-
Remove the bolts (x4) that attach the
LH rear door speaker to the LH rear door.
TIpUse of the following tool(s) is recommended:
- 8 mm socket
- Lift the LH rear door speaker upward and away from the door assembly to remove it from the vehicle.
Install
- Position the LH rear door speaker onto the door assembly.
-
Install the bolts (x4) that attach the LH rear door speaker to the LH rear door.4 Nm (2.9 lbs-ft)TIpUse of the following tool(s) is recommended:
- 8 mm socket
- Connect the LH rear door speaker electrical connector.
- Install the LH rear door trim panel. See Panel - Door Trim - Rear - LH (Remove and Replace).