17/06/2022 13:21:13

Trim - Rear Trunk - Rear Wall (Remove and Replace)

Correction code 15245602 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Remove the rear trunk load floor. See Trunk Load Floor - Rear (Remove and Replace).
  2. Release the clips (x6) that attach the rear trunk sill panel to the vehicle.
  3. Release the push clips (x4) that attach the rear wall rear wall trim to the vehicle.

Install

  1. Position the rear wall rear trunk trim to the vehicle, and then install the clips (x4) that attach the trim to the vehicle.
  2. Position the rear trunk sill panel to the vehicle, and then install the clips (x6) that attach the trunk sill panel to the vehicle.
  3. Install the rear trunk load floor. See Trunk Load Floor - Rear (Remove and Replace).