21/04/2023 16:10:28

Duct - Floor - 2nd Row - LH (Remove and Replace)

Correction code 18109702 1.38 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT, although it has been validated. Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near high voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.
  1. Open all four doors.
  2. Lower all four windows.
  3. Remove the LH and RH 1st row seat assembly. See Seat Assembly - 1st Row - LH (Remove and Replace).
  4. Remove the center console assembly. See Center Console Assembly (Remove and Install).
  5. Remove the instrument panel service panel. See Service Panel - Instrument Panel (Remove and Replace).
  6. Remove the driver footwell cover. See Cover - Footwell - Driver (Remove and Replace).
  7. Remove the LH middle A-pillar trim. See Trim - A-Pillar - Middle - LH (Remove and Replace).
  8. Remove the LH lower A-pillar trim. See Trim - A-Pillar - Lower - LH (Remove and Replace).
  9. Remove the passenger footwell cover. See Cover - Footwell - Passenger (Remove and Replace).
  10. Remove the RH middle A-pillar trim. See Trim - A-Pillar - Middle - LH (Remove and Replace).
  11. Remove the RH lower A-pillar trim. See Trim - A-Pillar - Lower - LH (Remove and Replace).
  12. Remove the LH and RH 2nd row seat outer bolster. See Bolster - Outer - Seat - 2nd Row - LH (Remove and Replace).
  13. Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  14. Partially release the clips (x4) that attach the LH lower C-pillar trim to access the LH lower B-pillar clip.
  15. Remove the LH lower B-pillar trim. See Trim - B-Pillar - Lower - LH (Remove and Replace).
  16. Partially release the clips (x4) that attach the RH lower C-pillar trim to access the RH lower B-pillar clip.
  17. Remove the RH lower B-pillar trim. See Trim - B-Pillar - Lower - LH (Remove and Replace).
  18. Remove the driver seat inner and outer risers. See Riser - Outer - Driver Seat (Remove and Replace).
  19. Remove the interior complete carpet. See Carpet - Interior Complete (Remove and Replace).
  20. Release the clips (x2) that attach the LH 2nd row floor duct to the vehicle, and then remove the duct from the vehicle.
    Tip: Use of the following tool(s) is recommended:
    • Clip pry tool

Install

  1. Position the LH 2nd row floor duct on the vehicle, and then install the clips (x2) that attach the duct to the vehicle.
  2. Install the interior complete carpet. See Carpet - Interior Complete (Remove and Replace).
  3. Install the driver seat inner and outer risers. See Riser - Outer - Driver Seat (Remove and Replace).
  4. Install the RH lower B-pillar trim. See Trim - B-Pillar - Lower - LH (Remove and Replace).
  5. Install the clips (x4) that attach the RH lower C-pillar trim to the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Verify the weather seal is seated properly.
  6. Install the LH lower B-pillar trim. See Trim - B-Pillar - Lower - LH (Remove and Replace).
  7. Install the clips (x4) that attach the LH lower C-pillar trim to the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Verify the weather seal is seated properly.
  8. Install the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  9. Install the LH and RH 2nd row seat outer bolster. See Bolster - Outer - Seat - 2nd Row - LH (Remove and Replace).
  10. Install the center console assembly. See Center Console Assembly (Remove and Install).
  11. Install the RH middle A-pillar trim. See Trim - A-Pillar - Middle - LH (Remove and Replace).
  12. Install the RH lower A-pillar trim. See Trim - A-Pillar - Lower - LH (Remove and Replace).
  13. Install the passenger footwell cover. See Cover - Footwell - Passenger (Remove and Replace).
  14. Install the LH and RH 1st row seat assembly. See Seat Assembly - 1st Row - LH (Remove and Replace).
  15. Install the instrument panel service panel. See Service Panel - Instrument Panel (Remove and Replace).
  16. Install the LH lower A-pillar trim. See Trim - A-Pillar - Lower - LH (Remove and Replace).
  17. Install the LH middle A-pillar trim. See Trim - A-Pillar - Middle - LH (Remove and Replace).
  18. Install the driver footwell cover. See Cover - Footwell - Driver (Remove and Replace).
  19. Raise all four windows.
  20. Close all four doors.