Cover - Trailer Hitch (Remove and Replace)
Correction code 10016002 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.
Remove
-
Remove the screws (x2), then release
the tabs (x10) that attach the trailer hitch cover to the rear diffuser, and then remove
the trailer hitch cover from the vehicle.
Install
-
Install trailer hitch cover onto the
rear diffuser, then fasten the tabs (x10), and then install the screws (x2) that attach
the cover to the diffuser.