Cover - Side - Seat Back - 2nd Row - LH (Remove and Replace)
Correction code 13050112 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.
Remove
- Move the driver seat forward.
- Open the LH rear door and lower the LH rear window.
-
Fold the LH 2nd row seat to the down
position.
NoteIf the 2nd row lower seat cushion is not present, protect the seat as required.
-
Release the clips (x2) that attach the
LH 2nd row seat back side cover to the LH 2nd row seat back, and then remove the cover
from the vehicle.
Install
-
Position the LH 2nd row seat back side cover onto the LH 2nd row seat back, and then
install the clips (x2) that attach the cover to the seat back.
- Fold the LH 2nd row seat to the up position.
- Raise the LH rear window and close the LH rear door.
- Move the driver seat to the original position.