2022-06-17

Seal - Secondary - Rear Door - LH (Remove and Replace)

Correction code 11705402 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Remove the LH rear door trim panel. See Panel - Door Trim - Rear - LH (Remove and Replace).
  2. Release the clips (x2) that attach the LH rear door seal to the door assembly, and then remove the seal from the assembly.
  3. Release the clips (x11) that attach the LH rear door secondary seal to the door assembly, and then remove the seal from the vehicle.

Install

  1. Align the LH rear door secondary seal onto the door assembly, and then install the clips (x11) that attach the seal to the door assembly.
  2. Position the LH rear door seal onto the door assembly, and then install the clips (x2) that attach the seal to the door assembly.
  3. Install the LH rear door trim panel. See Panel - Door Trim - Rear - LH (Remove and Replace).