17/06/2022 13:21:21

Trim - Side Wall - Trunk - LH (Remove and Replace)

Correction code 15240012 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT, although it has been validated. Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near high voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Install

  1. Position the LH trunk side wall trim on the vehicle.
  2. Secure the LH trunk side wall trim to the vehicle using the velcro strips (x3).
  3. Install the LH trunk load floor bracket. See Bracket - Trunk Load Floor - LH (Remove and Replace).
  4. Install the rear wall rear trunk trim. See Trim - Rear Trunk - Rear Wall (Remove and Replace).
  5. Install the rear trunk load floor. See Trunk Load Floor - Rear (Remove and Replace).
  6. Install the rear trunk parcel shelf. See Parcel Shelf - Rear Trunk (Remove and Replace).