2026-08-09

Button - Recliner Adjust - Driver Seat (Remove and Replace)

Correction code 13017102 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Open the LH front door.
  2. Using a trim tool, carefully remove the LH front seat recliner switch.
    Tip
    Use a twisting motion with the trim tool to release the switch.
    CAUTION
    Make sure the seat trim and the switch are not damaged during removal.

Install

  1. Position the LH front seat recliner switch to the seat, and then install the switch to the seat.
    Note
    Verify the switch operates correctly after installation.
  2. Close the LH front door.