26/04/2023 16:28:53

Seatbelt Intermediate Web Guide (Remove and Replace)

Correction code 20054302 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Torque Specifications

Table 1. Torque Specifications: Seatbelt Intermediate Web Guide (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts that attach the LH seat belt intermediate web guide to the vehicle
5 Nm (3.7 lbs-ft)
  • 8 mm socket
Reuse

Remove

  1. Open the LH doors.
  2. Move the driver seat fully forward.
  3. Remove the LH upper B-pillar trim. See Trim - B-Pillar - Upper - LH (Remove and Replace).
  4. Remove the bolts that attach the LH seat belt intermediate web guide to the B-pillar, and then remove the guide from the vehicle.
    Tip: Use of the following tool(s) is recommended:
    • 8 mm socket

Install

  1. Position the LH seat belt intermediate web guide onto the B-pillar, and then install the bolts that attach the guide to the B-pillar.
    5 Nm (3.7 lbs-ft)
    Tip: Use of the following tool(s) is recommended:
    • 8 mm socket
  2. Install the LH upper B-pillar trim. See Trim - B-Pillar - Upper - LH (Remove and Replace).
  3. Move the driver seat to its original position.
  4. Close the LH doors.