Gas Strut - Liftgate (Remove and Replace)
    
     Correction code
    
                                    11334402
                                    0.06
                                    
                                    
        
          NOTE: Unless otherwise explicitly
          stated in the procedure, the above correction code and FRT reflect all of the work
          required to perform this procedure, including the linked procedures. Do not stack correction codes unless
            explicitly told to do so.
        
          NOTE: See Flat Rate Times to learn
          more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
        
        
          NOTE: See Personal Protection to make sure proper PPE is worn when
          performing the below
          procedure.
    Correction code
    
                                    11334402
                                    0.06
                                    
                                    
        
          NOTE: Unless otherwise explicitly
          stated in the procedure, the above correction code and FRT reflect all of the work
          required to perform this procedure, including the linked procedures. Do not stack correction codes unless
            explicitly told to do so.
        
          NOTE: See Flat Rate Times to learn
          more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
        
        
          NOTE: See Personal Protection to make sure proper PPE is worn when
          performing the below
          procedure.
      
  
Remove
- Open the liftgate.
- Use a hood prop to support the liftgate.
- 
          Release the clip, and then remove the
            liftgate gas strut from the ball stud on the body.
          
- 
          Release the clip, remove the liftgate
            gas strut from ball stud on liftgate, and then remove strut from the vehicle.
          
Install
- 
          Install the liftgate gas strut onto the ball stud on liftgate, and then install the
            clip.
          
- 
          Install the liftgate gas strut onto the ball stud on the body, and then install the
            clip.
          
- Remove the hood prop.
- Close the liftgate.