2022-06-17

Pivot Sleeve - Seat Back - 2nd Row - Center (Remove and Replace)

Correction code 13057302 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Remove the LH 2nd row seat back from the vehicle. See Seat Back - 2nd Row - LH (Remove and Replace).
  2. Release the tabs (x2) that attach the center 2nd row seat back pivot sleeve to the seat back assembly, and then remove it from the assembly.

Install

  1. Install the center 2nd row seat back pivot sleeve onto the seat back assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    Ensure the tabs (x2) are secured onto the inner groove.
  2. Install the LH 2nd row seat back from the vehicle. See Seat Back - 2nd Row - LH (Remove and Replace).