Bracket - ISOFIX - LH (Remove and Replace)
Correction code
13050072
0.18
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
- Remove the LH and RH 2nd row seat outer bolsters. See Bolster - Outer - Seat - 2nd Row - LH (Remove and Replace).
- Remove the 2nd row seat lower cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
-
Remove the bolts (x2) that attach the
LH ISOFIX bracket to the vehicle, and then remove the bracket from the vehicle.
26 Nm (19.2 lbs-ft)TIpUse of the following tool(s) is recommended:- 11 mm socket
Install
-
Position the LH ISOFIX bracket into the vehicle, and then install the bolts (x2) that
attach bracket to the vehicle.26 Nm (19.2 lbs-ft)TIpUse of the following tool(s) is recommended:
- 11 mm socket
- Install the 2nd row seat lower cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
- Install the LH and RH 2nd row seat outer bolsters. See Bolster - Outer - Seat - 2nd Row - LH (Remove and Replace).