17/06/2022 13:09:20

Door Mirror Assembly - LH (Remove and Replace)

Correction code 12091102 0.30 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT, although it has been validated. Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near high voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.

Remove

  1. Remove the LH door mirror skull cap. See Skull Cap - Door Mirror - LH (Remove and Replace).
  2. Remove the LH front door decor. See Decor - Trim - Front Door - LH (Remove and Replace).
  3. Remove the LH front door trim panel. See Panel - Door Trim - Front - LH (Remove and Replace).
  4. Remove the LH front door outer belt seal. See Seal - Outer Belt - Front Door - LH (Remove and Replace).
  5. Remove the LH front door inner belt seal. See Seal - Inner Belt - Front Door - LH (Remove and Replace).
  6. Disconnect the door mirror assembly electrical connector, and then release the clip that attaches the electrical harness to the door.
  7. Remove the fir tree clip on the door flap seal to gain access to the door mirror assembly bolts.
  8. Remove the bolts (x3) that attach the door mirror assembly to the door.
    Informational PurposesAn informational icon, calling your attention
    Note
    12 mm or 13 mm. Torque 18 Nm.
  9. Remove the foam seal from the door mirror assembly, and then remove the mirror from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Carefully lift straight up to remove the door mirror assembly from the vehicle.
  10. Remove the bolts (x2) that attach the door mirror assembly to the LH front quarter glass assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    T30. Torque 6 Nm.
  11. Remove the bolts (x2) that attach the LH front quarter glass guide rail to the door mirror assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    T30. Toque 6 Nm.
  12. Remove the front LH quarter glass from the door mirror assembly.

Install

  1. Install the bolts (x2) that attach the door mirror assembly to the front LH quarter glass.
    Informational PurposesAn informational icon, calling your attention
    Note
    T30. Torque 6 Nm.
  2. Install the bolts (x2) that attach the front LH quarter glass guide rail to the door mirror assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    T30. Torque 6 Nm.
  3. Install the bolts (x3) that attach the door mirror assembly to the door.
    Informational PurposesAn informational icon, calling your attention
    Note
    12 mm or 13 mm. Torque 18 Nm.
    Informational PurposesAn informational icon, calling your attention
    Note
    If installing reworked mirror with washer, use 12 mm fasteners 1128096-00-B.
    Informational PurposesAn informational icon, calling your attention
    Note
    Align the guide rail onto the front laminated side glass.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Make sure the electrical harness connector is inboard of the door. Failure to install the fasteners using the following sequence can result in NVH issues.
  4. Install the foam seal onto the door mirror assembly.
  5. Install the fir tree clip onto the door seal flap retaining clip.
  6. Connect the door mirror electrical connector, and then secure the harness clip onto the door.
  7. Install the LH front door inner belt seal. See Seal - Inner Belt - Front Door - LH (Remove and Replace).
  8. Install the LH front door outer belt seal. See Seal - Outer Belt - Front Door - LH (Remove and Replace).
  9. Install the LH front door trim panel. See Panel - Door Trim - Front - LH (Remove and Replace).
  10. Install the LH front door decor. See Decor - Trim - Front Door - LH (Remove and Replace).
  11. Install the LH door mirror skull cap. See Skull Cap - Door Mirror - LH (Remove and Replace).