Seal - Inner Belt - Rear Door - LH (Remove and Replace)
Correction code 11704102 0.30 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.
Remove
- Remove the LH rear door trim panel. See Panel - Door Trim - Rear - LH (Remove and Replace).
-
Pull up to release the inner belt seal
from the LH rear door.
Install
-
Press the rear door inner belt seal
downwards into the rear door.
- Install the LH rear door trim panel. See Panel - Door Trim - Rear - LH (Remove and Replace).