2024-08-14
Trim - Bolster - Inner - Seat - 2nd Row - LH (Remove and Replace)
Correction code
13084702
0.18
NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.
NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Warning
This procedure is a DRAFT.
Although it has been validated, Warnings and Cautions might be missing. Follow safety
requirements and use extreme caution when working on or near High Voltage systems and
components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.
Remove
- Remove the LH 2nd row inner bolster substrate. See Substrate - Bolster - Inner - 2nd Row - LH (Remove and Replace).
-
Remove the LH 2nd row seat inner bolster trim from the bolster foam.
Install
-
Install the LH 2nd row seat inner bolster trim on the bolster foam.
- Install the LH 2nd row inner bolster substrate. See Substrate - Bolster - Inner - 2nd Row - LH (Remove and Replace).