2025-04-16

Replacement Keys - Program (No Keys Present)

Correction code – Key Fob: 17450513 Key Card: 17450306 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

  • 2025-04-16: Updated Service UI instructions.
  • 2023-07-21: Added Note about security-related toolbox actions.
Informational PurposesAn informational icon, calling your attention
Note
Some of the Toolbox Actions within this procedure are related to vehicle security, and can only be performed by Tesla employees or third parties authorized to perform security-related Toolbox Actions. To learn more, see the Service Subscription FAQs available in the user account dropdown menu.

Procedure

  1. Place the NFC Key card on the wireless charger pad.
  2. Perform the following routine using Service Mode or Toolbox (see 0005 - Service Modes): PROC_VCSEC_C_PAIR-NFC-CARD-V2via Toolbox: (link)via Service Mode: Low Voltage ➜ Keys ➜ Pair Key
  3. Input the number of keys to be paired to the vehicle, click Run Network, and allow the routine to complete.
  4. Check the function of the programmed NFC keys.
  5. Pair the key fob(s), if applicable. See Additional Key - Program (Existing Key Present).