Underhood Apron - Rear (Remove and Replace)
Correction code
12251102
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
- Open the hood.
-
Release the clips (x8) that
attach the rear underhood apron to the vehicle, and then remove the apron
from the vehicle.
Install
-
Position the rear underhood
apron into the vehicle, and then fasten the clips (x8) that attach the apron
to the vehicle.
- Close the hood.