17/06/2022 13:21:06

Trim - Side - Trunk - LH (Remove and Replace)

Correction code 15245002 0.24 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Remove the rear trunk parcel shelf. See Parcel Shelf - Rear Trunk (Remove and Replace).
  2. Remove the rear trunk load floor. See Trunk Load Floor - Rear (Remove and Replace).
  3. Remove the rear wall rear trunk trim. See Trim - Rear Trunk - Rear Wall (Remove and Replace).
  4. Remove the LH trunk load floor bracket. See Bracket - Trunk Load Floor - LH (Remove and Replace).
  5. Remove the trunk floor front trim. See Trim - Front - Floor - Trunk (Remove and Replace).
  6. Remove the LH 2nd row seat outer bolster. See Bolster - Outer - Seat - 2nd Row - LH (Remove and Replace).
  7. Release the clips (x4) and tab that attach the LH lower C-pillar trim to the LH middle C-pillar trim.
  8. Remove the LH mid C-pillar trim. See Trim - C-Pillar - Mid - LH (Remove and Replace).
  9. Release the clips (x7) that attach the LH upper C-pillar trim to the vehicle, and then move the upper C-pillar trim aside.
    Informational PurposesAn informational icon, calling your attention
    Note
    The LH upper C-pillar trim is still tethered to the seatbelt.
  10. Release the clips (x6) that attach the LH trunk side trim to the vehicle, and then disconnect the harnesses (x2) from the switches on the trim.
  11. Remove the LH trunk side trim from the vehicle.

Install

  1. Position the LH trunk side trim on the vehicle.
  2. Connect the electrical harnesses (x2) to the switches on the LH trunk side trim, and then install the clips (x6) that attach the trim to the vehicle.
  3. Position the LH upper C-pillar trim on the vehicle, and then install the clips (x7) that attach the trim to the vehicle.
  4. Install the LH mid C-pillar trim. See Trim - C-Pillar - Mid - LH (Remove and Replace).
  5. Install the clips (x4) and tab that attach the LH lower C-pillar trim to the LH middle C-pillar trim.
  6. Install the LH 2nd row seat outer bolster. See Bolster - Outer - Seat - 2nd Row - LH (Remove and Replace).
  7. Install the trunk floor front trim. See Trim - Front - Floor - Trunk (Remove and Replace).
  8. Install the LH trunk load floor bracket. See Bracket - Trunk Load Floor - LH (Remove and Replace).
  9. Install the rear wall rear trunk trim. See Trim - Rear Trunk - Rear Wall (Remove and Replace).
  10. Install the rear trunk load floor. See Trunk Load Floor - Rear (Remove and Replace).
  11. Install the rear trunk parcel shelf. See Parcel Shelf - Rear Trunk (Remove and Replace).